For the CD-ROM, the diagram indicates that 2 is Slave setting. What does this mean? Well, looking at the back of the device, we have 3 pairs of pins. So, to make it a slave device, I place a jumper over the central (second) p
In part 1 of this checklist, I will take you through the physical cleaning checkpoints of your desktop computer or laptop. In part 2 I will follow up with a list of things you can do to purge obsolete files, unused programs, crapware and more from your Windows mach
There is something satisfying about successfully completing a Lego project, after all, and using the popular plastic bricks as the support structure and case for your PC has proved to be a popular choice. You’ll find many examples of Lego cases on the web, utilizing either every different colour of brick that is available or designed with an impressive, blocky, almost 8-bit styled mosaic fin
For this particular exercise, I used a high-grade grease (non-conductive) rated for 2,000-3,000 RPMs. A thinner lubricant will suffer from separation at high speeds, which causes the grease to literally separate from the surface it coats. And, never, ever use WD
One problem that you may face with a wooden case is noise; the resonance of wood (a key aspect of its use in the construction of musical instruments) can result in fans, disk drives and the PSU being louder than they might be in a standard case. Use of foam padding, strips of felt and other absorbing materials can counter this, howe
Similarly, you may get away with reusing old storage devices (such as a hard disk drive used as a data store rather than for installing games or applications), power supplies (as long as they’re suitable for new motherboards, drives and graphics cards), card readers or case-mounted USB h
On each channel, there is a master and a slave device. The master device is connected in the middle of the cable, and the slave at the end of the cable. Each device must also be set with a hardware switch (a jumper) as to whether it is supposed to be the master or the slave. This is where almost all headaches and problems came
Rattling fans produce loud noises because they have suffered a bearing failure , a fault common to both sleeve and ball-type fans. When a failure occurs, it means the lubrication greasing the sleeve or ball bearings has dried out, causing the bearing to grind on plastic. Fortunately, regreasing the fan’s bearings will often fix the prob
Western Digital Green 500 GB 3.5-inch SATA III 64 MB hard drive : I wanted to find a cheap hard drive that would still offer a decent amount of storage. I absolutely love Western Digital hard drives (and absolutely despise Seagate hard drives), so I went with a Green 500 GB. Since loading times are going to be reduced anyways, might as well save some power while we’re at
You can carefully vacuum the keyboard to remove loose particles and dust. Afterwards, wipe the keys with a lint-free cloth that is lightly dampened. Finally, disinfect the keyboard using alcohol wipes or spray some alcohol-containing cleaner on your cloth. If the keyboard is seriously manky, you can also take it apart and wash the keys in bulk. Be sure to take a photo of the keyboard first, so that it’s easier to re-assem
Well, I hope that’s explained the whole IDE thing a bit more clearly. Once you’ve got it in, don’t forget to format the drive (or learn about what a filesystem is ). If you’re up for a more up to date and practical guide on adding a hard drive to your computer, my guide to SATA drives is probably more relev
With the arrival of Spring in the Northern Hemisphere, houses across the globe get a nice cleaning to rid them of dirt and clutter that has accumulated over the past year. Dust and junk also settle on our computer. Whether your PC is suffering from a clocked up fan or an overloaded hard drive, it is time to give it a thorough spring cleaning. With the following checklist this will be a bre
The hard disk is similar, but this time I chose ” Master with Slave Present “. Then I connect the cable up, bearing in mind that the hard drive as the master should be connected to the centre of the cable, with the slave CD-ROM drive being added at the
Install the graphics card by fully pressing it into the PCI-Express slot. Screw the back metal plate into the case, and make sure that the 6-pin power connector is attached on the other end of the graphics card to power it fu
Cybernetics – the embedding of digital and mechanical components into naturally-growing objects – has been a sci-fi dream (or nightmare to some) for many years. While you can’t yet install a Blu-ray drive in your lower torso, however, you can use nature’s own construction material, https://pcbuildinsight.Com/ w
After that, you’ll also be offered various methods to earn additional entries. They range from sharing a link to this giveaway on social networks; to commenting or visiting a specific page. The more you participate, the higher your chances of winning! You will receive 5 additional entries into the giveaway for every successful referral via your shared li